SMFFA-05-E 500 kg Electric Stationary Crucible Furnace
- Brand: OEM FURNACE
- Product Code: SMFFA-05-E
SMFFA-05-E is an electrically heated, stationary (non-tilting) crucible furnace we designed for melting and holding aluminium and its alloys; metal is taken from the crucible by ladle. The body sits directly on the floor with no frame underneath; if required, the furnace can also be set into a pit. We design the furnace from the crucible outwards: chamber size, heating element layout and insulation thickness follow the real dimensions of the crucible. This model is built around a Morgan Excel E BX247E bale-out crucible (≈444 kg Al).
Heating layout: hexagonal chamber, 3 tiers
The chamber is a hexagonal platform. One wall carries the crucible support brick and has no heating elements. The other 5 walls each carry heating blocks in 3 tiers; each tier is one phase of 5 blocks in series, so the bottom, middle and top of the crucible heat evenly. The tier ends are joined in star with a heavy copper bar.
Easy maintenance
Block-to-block links are flexible bars outside the insulation. A failed block is removed and replaced on its own, without dismantling the insulation.
Lid and metal take-out
The lid is lifted and swung aside with a counterweighted hand lever. As an option, the lid can be opened by a Ø50 hydraulic cylinder with a 0.75 kW mini power unit. Metal is taken from the open crucible by ladle. The operator reaches the crucible safely from a fixed platform and stairs beside the furnace.
Power and control
The main control panel stands on the floor, separate from the furnace; power cables run in a floor cable duct and enter the terminal box on the body from below. The terminal box fully encloses the element connections and is ventilated through holes at its edges. A signal tower on the panel shows heating, warning and alarm states.
Safety
If the crucible cracks, molten metal escapes before reaching the heating elements: the floor refractory slopes to a drain opening closed by a hinged flap that opens under the metal, which then flows into a drain tray. Besides the control thermocouple the chamber has a separate over-temperature (limit) thermocouple; metal temperature is measured with an L-type thermocouple.
Technical data
| Product code | SMFFA-05-E (Stationary Melting Furnace For Aluminium, Electric) |
|---|---|
| Capacity | ≈444 kg aluminium (crucible catalogue capacity) |
| Crucible | Morgan Excel E BX247E, bale-out (no spout), Ø775 × 750 mm |
| Heating | 15 heating blocks × ≈5,067 W (5 walls × 3 tiers, block 450 × 250 mm) |
| Installed power | 76 kW, 3-phase 380–400 V 50 Hz, star connection |
| Line current / main fuse | ≈109 A / 125 A |
| Chamber working temperature | 950 °C (for 750 °C metal); max. 1200 °C |
| Metal take-out | By ladle; no tilting |
| Lid | Counterweighted hand lever; hydraulic opening optional |
| Installation | Body directly on the floor, no frame |
| Body (Ø × H) | Ø1520 × 1385 mm |
| Crucible mouth height | ≈1,150 mm above floor |
| Operator platform | Yes, with stairs |
| Control | Separate main panel with signal tower; terminal box on the body |
| Insulation | Refractory + insulating brick + ceramic fibre board; 50 mm blanket behind the blocks |
| Finish | Body aluminium paint, cladding sheets anthracite |
We manufacture the furnace together with the chamber, heating blocks, terminal box and main control panel, and install and commission it on site. We work with you on other capacities, a gas-fired version and crucible choice at quotation stage.
For price and lead time, use the Request a Quote button or call +90 533 945 27 94.
Tags: SMFFA-05-E, 500 kg stationary furnace, electric stationary crucible furnace, crucible melting furnace, aluminium melting furnace, bale-out crucible furnace, resistance crucible furnace