CPCO-10-G Conveyor Powder Coating Oven, 10 m Gas-Fired
- Brand: OEM FURNACE
- Product Code: CPCO-10-G
CPCO-10-G is a gas-fired tunnel oven for curing powder coatings on a continuous overhead conveyor. Parts pass through the tunnel once; the in-oven conveyor length is in the 10 m class (tunnel length 9,375 mm) and parts in a 600 × 2,000 mm work envelope are cured at up to 200 °C. At a 20-minute cure the line speed is about 0.47 m/min.
Indirect heating, clean oven air
Heat is generated in a thermoblock beside the tunnel: the burner fires a combustion chamber and heat exchanger, and the flue gas leaves through the stack without mixing with the oven air. Circulation fans deliver the heated air into the tunnel; it passes through the parts and returns to the thermoblock. This size has one thermoblock; longer tunnels carry more thermoblocks so the temperature stays even along the tunnel.
Fully bolted panel kit
The body is built from rock-wool filled sandwich panels on a 500 mm module. Panels, angle profiles and frame are joined with bolts and screws; nothing is welded. The oven ships as a flat-packed kit, is erected quickly on site and can later be extended module by module.
Overhead conveyor and openings
The I-beam (I-100) monorail conveyor with X-458 chain and an inverter-driven corner drive runs at 0.3–1.5 m/min. Inlet and outlet openings are narrowed to the part silhouette with adjustable plates; exhaust fans at the openings remove spill-over heat and volatiles. Control panel, gas train and conveyor drive are supplied with the oven.
One line with the powder booth
The oven is sized to work with the PCB-03 cartridge filter powder coating booth, placed on the same conveyor ahead of the oven inlet; booth and oven share the same work envelope.
Technical data
| Product code | CPCO-10-G (Conveyor Powder Coating Oven, Gas) |
|---|---|
| In-oven conveyor class | 10 m |
| Tunnel length | 9,375 mm |
| Work envelope (hanger, W × H) | 600 × 2,000 mm |
| Tunnel cross-section (W × H) | 1,000 × 2,800 mm |
| Operating temperature | ≤200 °C |
| Heating | Natural gas, indirect (flue gas does not mix with oven air) · 1 thermoblock |
| Line speed (20 min cure) | ≈0.47 m/min |
| Capacity (approx.) | ≈56 m²/h coated surface* |
| Conveyor | I-100 overhead monorail, X-458 chain, inverter drive, 0.3–1.5 m/min |
| Body | Bolted sandwich panel kit, rock-wool filled, 500 mm module, no welding |
| Openings | Adjustable silhouette plates, exhaust fans |
| Scope | Control panel, gas train, conveyor and drive |
| Matching booth | PCB-03 |
| Weight (approx.) | ≈7.3 t |
* Assuming a 20-minute cure, 2,000 mm hanger height, both sides coated and 50 % hanger loading. Actual capacity depends on part shape and hanging pattern.
We manufacture the oven together with the conveyor, control panel and gas train, and install and commission it on site. Other lengths, a wider section and line equipment such as pre-treatment and dry-off ovens are discussed at quotation stage.
For price and lead time, use the Request a Quote button or call +90 533 945 27 94.
Tags: CPCO-10-G, powder coating oven, conveyor oven, tunnel curing oven, powder curing oven, gas-fired curing oven, bolted panel oven